When used as a constituent of raw meal for cement kiln, electric arc furnace (EAF) slag, being a source of non-carbonated lime, can contribute to a sustainable development in as much as both the kiln thermal requirement and CO2 generation are reduced. Ternary mixtures containing limestone, clay and EAF slag (up to 35%), as a partial substitute for both natural materials, were submitted to laboratory and industrial tests. Burnability indexes better than that given by the reference mix (without EAF slag) were obtained. Chemical, physical and mechanical parameters of cements made with EAF slag-derived clinkers met the European standard EN 197-1. The kiln emissions of SO2, CO, HCl, HF, metals, total solid particles and organic carbon were lower than the concentration limits in the exhaust gas prescribed by the national environmental standards
Use of Electric Arc Furnace Slag as a Raw Feed Component for Portland Clinker Manufacture
MARROCCOLI, MilenaWriting – Original Draft Preparation
;TELESCA, ANTONIOWriting – Original Draft Preparation
;VALENTI, Gian Lorenzo
Writing – Review & Editing
2007-01-01
Abstract
When used as a constituent of raw meal for cement kiln, electric arc furnace (EAF) slag, being a source of non-carbonated lime, can contribute to a sustainable development in as much as both the kiln thermal requirement and CO2 generation are reduced. Ternary mixtures containing limestone, clay and EAF slag (up to 35%), as a partial substitute for both natural materials, were submitted to laboratory and industrial tests. Burnability indexes better than that given by the reference mix (without EAF slag) were obtained. Chemical, physical and mechanical parameters of cements made with EAF slag-derived clinkers met the European standard EN 197-1. The kiln emissions of SO2, CO, HCl, HF, metals, total solid particles and organic carbon were lower than the concentration limits in the exhaust gas prescribed by the national environmental standardsFile | Dimensione | Formato | |
---|---|---|---|
Use of electric arc furnace slag as a raw feed component for Portland clinker manufacture.pdf
non disponibili
Tipologia:
Documento in Post-print
Licenza:
DRM non definito
Dimensione
2.67 MB
Formato
Adobe PDF
|
2.67 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.