Vertical profiles of the latent heat flux in a convective boundary layer (CBL) are obtained for the first time over complex terrain with airborne water vapour differential absorption lidar and Doppler wind lidar. During the Convective and Orographically-induced Precipitation Study (COPS) over the Black Forest mountains in south-western Germany both lidars were installed nadir-viewing onboard the Falcon research aircraft of the Deutsches Zentrum f¨ur Luft- und Raumfahrt (DLR).On30 July 2007, additional in situ measurements by theKarlsruhe Institute of Technology (KIT) were performed with a Dornier-128 aircraft that flew below the Falcon. This unique instrument configuration allows us to validate the lidar-derived fluxes and to assess lidar-specific issues such as instrument noise and data gaps that impinge on the results. The cospectra of in situ humidity and vertical velocity peak at wavelengths between 1 and 3 km and reveal that the dominant scales of turbulent transport are larger than 700 m in dimension. Consequently the airborne lidars’ horizontal and vertical resolution of ∼ 200 m is sufficient to capture most of the flux. The lidar and in situ fluxes of five collocated 45 kmflight legs agree within ±20%; the average difference over the total distance of 225 km is 3%. A flux comparison with ground-based water vapour Raman and wind lidars shows agreement within the instruments’ accuracies under low-wind conditions. All latent heat fluxes vary between 100 and 500 W/m2 in the CBL and have small vertical divergences. Vertical velocity spectra in the mid-CBL enable us to estimate the dissipation rate of turbulent kinetic energy that amounts to 5 × 10−4 m2 s−3 in the Rhine Valley and 10−3 m2 s−3 over the Black Forest mountains. This new airborne lidar instrumentation proves to be a valuable tool for the study of CBL processes and variability, particularly over complex terrain.

Latent heat flux measurements over complex terrain by airborne water vapour and wind lidars

DI GIROLAMO, Paolo
2011-01-01

Abstract

Vertical profiles of the latent heat flux in a convective boundary layer (CBL) are obtained for the first time over complex terrain with airborne water vapour differential absorption lidar and Doppler wind lidar. During the Convective and Orographically-induced Precipitation Study (COPS) over the Black Forest mountains in south-western Germany both lidars were installed nadir-viewing onboard the Falcon research aircraft of the Deutsches Zentrum f¨ur Luft- und Raumfahrt (DLR).On30 July 2007, additional in situ measurements by theKarlsruhe Institute of Technology (KIT) were performed with a Dornier-128 aircraft that flew below the Falcon. This unique instrument configuration allows us to validate the lidar-derived fluxes and to assess lidar-specific issues such as instrument noise and data gaps that impinge on the results. The cospectra of in situ humidity and vertical velocity peak at wavelengths between 1 and 3 km and reveal that the dominant scales of turbulent transport are larger than 700 m in dimension. Consequently the airborne lidars’ horizontal and vertical resolution of ∼ 200 m is sufficient to capture most of the flux. The lidar and in situ fluxes of five collocated 45 kmflight legs agree within ±20%; the average difference over the total distance of 225 km is 3%. A flux comparison with ground-based water vapour Raman and wind lidars shows agreement within the instruments’ accuracies under low-wind conditions. All latent heat fluxes vary between 100 and 500 W/m2 in the CBL and have small vertical divergences. Vertical velocity spectra in the mid-CBL enable us to estimate the dissipation rate of turbulent kinetic energy that amounts to 5 × 10−4 m2 s−3 in the Rhine Valley and 10−3 m2 s−3 over the Black Forest mountains. This new airborne lidar instrumentation proves to be a valuable tool for the study of CBL processes and variability, particularly over complex terrain.
2011
File in questo prodotto:
File Dimensione Formato  
757_ftp.pdf

non disponibili

Tipologia: Documento in Post-print
Licenza: DRM non definito
Dimensione 579.84 kB
Formato Adobe PDF
579.84 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11563/23050
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 39
  • ???jsp.display-item.citation.isi??? 35
social impact