The removal of dyes from wastewater is an important topic in environmental applications. Methylene blue (MB) is one of the most worrisome compounds, as it is widespread and used in many industrial activities. Adsorption represents an effective technique for the removal of this contaminant. Thermo plasma expanded graphite (TPEG) is an industrial material characterized by a fibrous morphology, a very low density and overlapped graphene layers. TPEG has a higher specific surface compared to conventional thermo-expanded graphite and it can establish effective attractive forces with charged pollutants. These properties make TPEG a very promising adsorbent material. In the present work, TPEG was tested in an innovative multilayer column system to treat MB contaminated solutions. Several batch experiments were carried out by varying pH, initial MB concentration and temperature. The optimal adsorption performance was assessed at pH 11, around which the TPEG assumed the maximum negative charge. Based on these results, the adsorption mechanism appeared to be related mainly to electrostatic interactions. At room temperature, the greatest amount of MB adsorbed on TPEG was detected by treating solutions with an initial concentration of 30 mgMB/L. The temperature increase from 20 to 40 °C caused an enhanced adsorption capacity when concentrations higher than 10 mgMB/L were treated. The adsorption trends were accurately described by a pseudo-second order kinetic law and the adsorption isotherms at 20 and 40 °C were found to follow both the features of Freundlich and Langmuir models. The adsorption capacity was estimated to reach threshold values around 95 mgMB/gTPEG and 265 mgMB/gTPEG at 20 and 40°C, respectively. The Gibbs energy change (ΔG°) was calculated to about −7.80 kJ/mol, which proved that the process is spontaneous from a thermodynamic point of view. Finally, it was verified that TPEG can be efficiently reused 5 times after a simple chemical regeneration phase with HCl.

Methylene blue adsorption on thermo plasma expanded graphite in a multilayer column system

Siciliano A.
Conceptualization
;
Masi S.
Writing – Review & Editing
;
Greco M.
Writing – Review & Editing
2021-01-01

Abstract

The removal of dyes from wastewater is an important topic in environmental applications. Methylene blue (MB) is one of the most worrisome compounds, as it is widespread and used in many industrial activities. Adsorption represents an effective technique for the removal of this contaminant. Thermo plasma expanded graphite (TPEG) is an industrial material characterized by a fibrous morphology, a very low density and overlapped graphene layers. TPEG has a higher specific surface compared to conventional thermo-expanded graphite and it can establish effective attractive forces with charged pollutants. These properties make TPEG a very promising adsorbent material. In the present work, TPEG was tested in an innovative multilayer column system to treat MB contaminated solutions. Several batch experiments were carried out by varying pH, initial MB concentration and temperature. The optimal adsorption performance was assessed at pH 11, around which the TPEG assumed the maximum negative charge. Based on these results, the adsorption mechanism appeared to be related mainly to electrostatic interactions. At room temperature, the greatest amount of MB adsorbed on TPEG was detected by treating solutions with an initial concentration of 30 mgMB/L. The temperature increase from 20 to 40 °C caused an enhanced adsorption capacity when concentrations higher than 10 mgMB/L were treated. The adsorption trends were accurately described by a pseudo-second order kinetic law and the adsorption isotherms at 20 and 40 °C were found to follow both the features of Freundlich and Langmuir models. The adsorption capacity was estimated to reach threshold values around 95 mgMB/gTPEG and 265 mgMB/gTPEG at 20 and 40°C, respectively. The Gibbs energy change (ΔG°) was calculated to about −7.80 kJ/mol, which proved that the process is spontaneous from a thermodynamic point of view. Finally, it was verified that TPEG can be efficiently reused 5 times after a simple chemical regeneration phase with HCl.
2021
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0301479721014274-main.pdf

accesso aperto

Tipologia: Documento in Post-print
Licenza: Creative commons
Dimensione 8.76 MB
Formato Adobe PDF
8.76 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11563/150096
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 21
  • ???jsp.display-item.citation.isi??? ND
social impact