This paper reports experimental results relative to the influence of pore fluid composition on the peak strength of the Bisaccia clay and on the residual shear strength of several different clayey soils: the Ponza bentonite, commercial bentonite and kaolin, Bisaccia, Gela and Marino clays. Triaxial tests were car-ried out on the Bisaccia clay reconstituted with distilled water and with a 1 M NaCl solution. Direct shear and ring shear tests were carried out on dry materials and on the materials reconstituted with distilled water, NaCl solutions at various concentrations, cyclohexane. Some tests were carried out by using KCl solutions and ethanol. The results show that pore fluid composition influences greatly both the peak and residual shear strength of smectitic soils, even when the clay frac-tion is very low. The residual shear angle is about 5° in distilled water, 15° in concentrated NaCl solution, and varies between 30° and 35° for materials dry or prepared with cyclohexane. The residual friction angle is strongly correlated to the static dielectric constant of the pore fluid.

Shear strength of clays and clayey soils: the influence of pore fluid composition

DI MAIO, Caterina
2004-01-01

Abstract

This paper reports experimental results relative to the influence of pore fluid composition on the peak strength of the Bisaccia clay and on the residual shear strength of several different clayey soils: the Ponza bentonite, commercial bentonite and kaolin, Bisaccia, Gela and Marino clays. Triaxial tests were car-ried out on the Bisaccia clay reconstituted with distilled water and with a 1 M NaCl solution. Direct shear and ring shear tests were carried out on dry materials and on the materials reconstituted with distilled water, NaCl solutions at various concentrations, cyclohexane. Some tests were carried out by using KCl solutions and ethanol. The results show that pore fluid composition influences greatly both the peak and residual shear strength of smectitic soils, even when the clay frac-tion is very low. The residual shear angle is about 5° in distilled water, 15° in concentrated NaCl solution, and varies between 30° and 35° for materials dry or prepared with cyclohexane. The residual friction angle is strongly correlated to the static dielectric constant of the pore fluid.
2004
9783211213230
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11563/7089
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? 6
social impact