An Automatic Compact Schlieren Imaging System for Ultrasound Transducers Testing

The current standard used for the characterization of ultrasonic transducers is the hydrophonic technique, which is able to measure the acoustic pressure profile. This technique allows a quantitative analysis, but is marred by several problems. A scan of the region of interest is a time-consuming operation, especially when measuring a long acoustic beam. Furthermore, a hydrophone placed near the radiating surface is certainly an impediment to the free propagation of the field. Off-axis measurements can be inaccurate because of the angular response of the hydrophone. These problems, together with the costs, have encouraged the search for an alternative quick and inexpensive test system. The well-known Schlieren technique allows a real-time visualization of the whole pressure range of the transducers, but to display the entire beam emitted by the transducers it is necessary to use very large-diameter lenses, with focal lengths of several meters. Such systems are very cumbersome and difficult to use. The system developed in this paper allows the imaging of an acoustic beam up to 200 mm in length, but the system is compact, being only about 1 m long and 0.30 m wide. A similar system based on the classic Schlieren effect would be several meters long, with lenses of 200 mm in diameter. Finally, the system can reconstruct the section of the beam at any height, using an acoustic tomography technique, and can also implement a quantitative analysis. Because it uses only commercial components, the developed and fabricated ultrasonic beam analyzer is a very low-cost imaging system. The goal of this work is to create a compact, low-cost system based on this technique to test a wide range of ultrasonic transducers up to 40 MHz and above.